Skip to main content

Perodua Bezza Advance - Car Battery Replacement

By
3 comments

Perodua Bezza Smart entry key - Battery Replacement

By
If you need to press the smart entry button for a few times to unlock or lock your car door, there is a good chance that the smart entry key battery is weak. I just replaced mine yesterday and the  smart key is as responsive when I got it new.

Use a flat-head  screwdriver and position it in the little notch and pry open the cover.

Original Panasonic CR2032 battery. 

New CR2032 battery.


 

New battery fitted in. 
Labels:

Comments

  1. Carlos HarrisFebruary 6, 2020 at 1:34 AM

    Cool. That can be a reference for my Perodua Bezza

    ReplyDelete
  2. Jack CJune 25, 2020 at 8:27 AM

    CR2025 battery is a thinner version of CR2032, and has lower capacity. It probably can still fit in and power the key fob, but it won't last as long as CR2032. Just get the recommended CR2032.

    ReplyDelete
  3. WayneJuly 14, 2020 at 7:14 PM

    Thanks for the guide. I've replaced the battery for both key fobs, but they won't work even I have measured the batteries are 3V before replacement. Any idea?

    Thank you.

    ReplyDelete
  4. TKPROSeptember 23, 2022 at 7:51 AM

    thank you, now i know more about my Perodua Bezza

    ReplyDelete
  5. Driving CherrryDecember 26, 2022 at 4:06 AM

    What a nice post . It increase my knowledge , thankyou so much for share it with us .

    ReplyDelete

Post a Comment

Popular posts from this blog

Perodua Bezza - Headlight Bulbs

By
The Perodua Bezza's headlight uses a H11 55W bulb for it's low beam and a HB3 60W bulb for it's high beam. It is always a good idea to use the specified wattage rating bulbs if you are going to fit aftermarket bulbs. The fog lights on the Perodua Bezza uses the same H11 55W bulb. Price range for the H11 and HB3 seems to be on the high side compared to a H4 or H7 for example
21 comments
Read more

Perodua Bezza first service - free inspection

By
My Perodua Bezza Advance was due for it's first service, so I had to drive to the service center. Made an appointment the day before. It was a good experience at the service center, as the staffs were friendly and efficient. Wait time for the free inspection was slightly under an hour and the car was ready. The staff recommended a battery terminal protector and windshield washer, it didn't cost much so I just ahead with it. Since I was at the service center, I bought a bottle of radiator coolant as well so that I can mix and top up the coolant at home. A bottle of radiator coolant(0.5L) for the Perodua Bezza cost RM13.90. I was told the next service which requires engine oil change will cost about RM190. Somehow they recommended an auto transmission fluid change on the 10000km mileage as well. The total bill will be RM290 if I agree to ATF change. Labor charge is free for the first three service. Recommended engine oil for Perodua Bezza 1.3 Advance is fully synthetic 0
19 comments
Read more